Northwest Dryer & Machinery
Dedicated to Excellence since 1964
Scroll down to view a complete list of menu items
Please take a few minutes to visit the rest of our site.
Northwest Dryer maintains an extensive stock of essential replacement parts for most brands of veneer dryers and the manufacturing capabilities to create hard-to-get parts as required. Look to us for rapid delivery of the commonly used parts such as 8T Hook Tooth Sprockets, Star Gears, Door Seals. etc.
Shown below are the Veneer Dryer Chain Guides we have in stock.
|
|
NW-18 Chain Return Shoe Replaces Moore RD-7
|
|
|
|
NW-31 Chain Guide Replaces Coe 8213
|
|
|
|
NW-32 for Coe M-62 Replaces Coe 7907
|
|
|
|
NW-33 Top Chain Guide Replaces Coe 8228
|
|
|
|
NW-64 Prentice Chain Guide Replaces Prentice C30
|
|
|
|
NW-J77C for Coe M-72 |
|
|
|
NW-158 Chain Guide for Moore Dryers Replaces RD-158
|
|
|
|
S 10369 Replaces C064719
|
|
Service, Repair and Upgrade
Our scanner repair and calibration facility can upgrade and repair your "Orange Box" or give you immediate turnaround from our stock.
We can repair all components from circuit boards to sheet metal. Our solid-state laser replacement usually takes 2 days, including a calibration cycle on our state of the art calibration machine! Your scanner is returned in about a week better-than-new!
We also supply Orange Box scanners as a swap with immediate shipment from our stock.
Laser Scanner Operation
Laser scanners emit a beam of coherent (laser) light which reflects from the surface of the log (or any other surface) and into a camera lens that is offset from the laser. In this way, the distance is measured similar to the way your eyes perceive distance because of the offset of your eyes from each other.
The reflected "spot" is passed through a lens and focused onto a linear array of 512 semiconductor pixels. The position of the "spot" on the array depends on the distance from the scanner to the target log. The NWD3950 utilizes spatial information contained in the reflected laser beam to allow us to mathematically provide subpixel accuracy, multiplying the resolution of the system.
Calibration is achieved by mounting the scanner on a fixture and moving a target through the measurement range, storing position information at each point measured by a high accuracy linear encoder.
Northwest Dryer has a 47,000 square foot CNC equipped machine shop dedicated to your machining and fabrication needs.
Our large vertical mill can drill, tap and finish 40' X 10' steel plates for your press.
We have a 60' lathe that can handle material 4' in diameter.
Our ten CNC machines are staffed by in-house programmers and experienced machinists to create any custom or hard-to-get parts you need to keep your production going.
We can even create CNC part programs from broken parts!
We are responsive with excellent turn-around time. We really serve our customers.
Northwest Dryer has been supplying parts for many types of machines in the wood products industry for four decades
Our Commitment is to meet your parts requirements faster and more economically from our extensive stock or to fabricate special requirements quickly in our CNC equipped Machine Shop.
