Northwest Dryer & Machinery
Dedicated to Excellence since 1964
Scroll down to view a complete list of menu items
Please take a few minutes to visit the rest of our site.
Northwest Dryer maintains an extensive stock of essential replacement parts for most brands of veneer dryers and the manufacturing capabilities to create hard-to-get parts as required. Look to us for rapid delivery of the commonly used parts such as 8T Hook Tooth Sprockets, Star Gears, Door Seals. etc.
REPLACEMENT DRYER DOORS FOR ALL VENEER DRYERS
FLOATING INSIDE SKIN
PREVENTS WARPED DOORS
INSIDE SKIN IS:
12 GA. MILD STEEL OR
16 GA. STAINLESS STEEL
STAINLESS BOOT
(OPTIONAL)
ALL DOORS AVAILABLE IN:
3" OR 5" THICKNESS AND ARE
INSULATED WITH 8 POUND
DENSITY ROCKWOOL BOARD
OUTSIDE SKIN IS:
14 GA. MILD STEEL OR
16 GA. STAINLESS STEEL
|
|
NW-1 TEFLON BUSHING
Our most popular Dryer Bushing Made from our proprietary Teflon compound 1 1/2" ID x 2 1/2" OD x 1 3/4" LG |
|
|
|
NW-2 TEFLON BEARING 1 1/4" ID x 2" OD x 2 1/4" LG
Made from our proprietary Teflon compound |
|
|
|
NW-3 TEFLON BEARING 1" ID x 2" OD x 2 1/4" LG
Made from our proprietary Teflon compound |
|
|
|
GB-1 CARBON BUSHING 1 1/2" ID x 2 1/2" OD x 1 3/4" LG |
|
|
|
GB-4 CARBON BUSHING 1" ID x 45mm OD x 1 5/8" LG |
Graphite Raute Dryer Bushings Available
Teflon Bearings Available too! |
|
|
GCB-1 CARBON BUSHING (copper) 1 1/2" ID x 2 1/2" OD x 1 3/4" LG |
|
|
|
NW-5 BRONZE RABBIT EAR SPACER Used in Cooling Section to space rolls further apart |
|
|
|
NW-104 & NW 204 Hanger Bearing Bracket. NW 104 is 2" centers, NW 204 is 3" centers Used With NW 101 Nylatron Bushing |
|
|
|
HB-1 |
 1 1/4" shaft with flat back, 2" ctr. to ctr. These are greased and sealed with Stainless Ball Bearings and are a direct replacement for Coe™ PC084028, (note: (2) set screws included) |
|
|
HB-106FF | 1 1/4" shaft with flat back, 2" ctr. to ctr. These are greased and sealed with Stainless Ball Bearings and are a direct replacement for Coe™(note: (2) set screws included) |
|
|
HB-207FF | 1 1/4" shaft with made to sit over the angle iron, 3" ctr. to ctr. These are greased and sealed with Stainless Ball Bearings and are a direct replacement for Coe™(note: (2) set screws included) |
Northwest Dryer has a 47,000 square foot CNC equipped machine shop dedicated to your machining and fabrication needs.
Our large vertical mill can drill, tap and finish 40' X 10' steel plates for your press.
We have a 60' lathe that can handle material 4' in diameter.
Our ten CNC machines are staffed by in-house programmers and experienced machinists to create any custom or hard-to-get parts you need to keep your production going.
We can even create CNC part programs from broken parts!
We are responsive with excellent turn-around time. We really serve our customers.
Northwest Dryer has been supplying parts for many types of machines in the wood products industry for four decades
Our Commitment is to meet your parts requirements faster and more economically from our extensive stock or to fabricate special requirements quickly in our CNC equipped Machine Shop.
