Northwest Dryer & Machinery Co.

Up Tools Used Equipment News History Home

Home
Up 

 

 

CAST GUDGEONS for VENEER DRYERS 

THE LIST BELOW REPRESENTS THE GUDGEONS THAT WE KEEP IN  STOCK.

CUSTOM OR NON-STOCK? WE CAN MAKE IT WITH FAST TURNAROUND. PLEASE CONTACT US.

CLICK ON THE PART NUMBER TO SEE A DRAWING OF THE PART (PDF).    

 

Part Number

Stem Dia.

Stem Length

Keyseat

Details

Applcation
NW-6 1-1/4" 2" NONE INFEED IDLER
NW-7 1-1/4" 3-1/2" 1/4" WOODRUFF INFEED DRIVE
NW-7M 1-1/4" 3" 1/4" WOODRUFF INFEED DRIVE
NW-7MP 1-1/4" 3" NONE INFEED IDLER
NW-7P 1-1/4" 3-1/2" NONE INFEED IDLER
NW-8 1-1/2" 2" NONE TOP IDLER
NW-J8C 1-1/2" 1-3/4" NONE TOP IDLER
NW-9 1-1/2" 5" NONE MANY
NW-9F 1-1/4" 5" NONE
NW-9FLP 1-1/4" 5-1/4" NONE
NW-9K-1/4 1-1/2" 5" 1/4" WOODRUFF BOTTOM DRIVE
NW-9K-3/8 1-1/2" 5" 3/8" WOODRUFF TOP/BOTTOM DRIVE
NW-9KF- 1/4 1-1/4" 5" 1/4" WOODRUFF
NW-9KF- 3/8 1-1/4" 5" 3/8" WOODRUFF
NW-9KFS 1-1/4" 5" 1/4" x 3" long key
NW-9KS 1-1/2" 5" 1/4" x 3" long key TOP/BOTTOM DRIVE
NW-9LP 1-1/2" 5-1/4" NONE
NW-92K 1/4 1-1/2" 5" (2) 1/4" WOODRUFF
NW-92K 3/8 1-1/2" 5" (2) 3/8" WOODRUFF
NW-92KB 1-1/2" 5" (2) 3/8" WOODRUFF SNAP RING
NW-J69C 1-1/2" 2-3/4" NONE SNAP RING TOP IDLER
NW-J705KC 1-1/2" 3-3/4" 3/8" WOODRUFF TOP DRIVEN
NW-J706KC 1-1/2" 4-3/8" 3/8" WOODRUFF TOP DRIVEN
NW-J707KC 1-1/2" 4-3/8" 3/8" WOODRUFF TOP DRIVEN
NW-J712KC 1-1/2" 7-3/4" (2) 3/8" WOODRUFF STEEL M-72 BOTTOM DRIVER
NW-J752KC 1-1/2" 7-3/8" (2) 3/8" WOODRUFF STEEL M-62 BOTTOM DRIVER

 

MACHINED GUDGEONS

                                        
          

The machined gudgeons shown above can be made to replace any of the cast gudgeons that we provide.
Any other gudgeons you may need can be produced on very short notice.

Key Benefits

bulletMachined Steel
bulletMachined After Assembly
bulletGuaranteed On Center Shaft
bulletCan Be Staked Or Welded to Roll Tubing

 

 

 

 

[ Home ] [ Dryer Parts ] [ Patchers ] [ Green End ]


Copyright © 2002 Northwest Dryer & Machinery, Inc.
Last modified: May 27, 2011